Performance - VW Golf MK7 (2012-2020)

Following two years of extensive testing and development, Direnza is proud to present a revolution in engine mount design. Based on the findings of research into the limitations of conventional engine mounts, Direnza’s new design dramatically increases the strength of the connection between engine and vehicle chassis compared with stock mounts, significantly reducing a motor’s movement under load and during hard cornering. Created by automotive engineers using sophisticated CAD software, and honed with finite element analysis (FEA), Direnza’s new engine mounts noticeably improve throttle and turn-in response, as confirmed by professional drivers during road and track testing sessions. Enhancing the appearance of any engine bay, the mount bodies are manufactured from aircraft grade 6061-T6 aluminum anodized black, and are complemented by stiff poly bushings finished in contrasting red. As a special touch, the Direnza logo is machine-etched into the mount body. Fitment Audi A3 8V 2.0 TFSI 2012-onwards modelsAudi TT MK3 8S 2.0 TFSI 2014-onwardsSeat Leon 5F 2.0 TSI 2012-onwardsSkoda Octavia 5E 2.0 TSI 2013-onwardsVolkswagen Golf MK7 2.0T 2012-onwards Please note – Uprated engine mounts will increase vibrations felt through the cabin and as such are intended for track use Bolts included with this product must be checked for tightness before installation. Product Category Other Part Number DZEM050

Read more less

034Motorsport's Motorsport StreetSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport StreetSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is slightly higher than stock. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Version Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts

Read more less

The Motorsport Line StreetSport Motor Mount Retrofit Kit for the Audi/VW MQB chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Converts TrackSport Mounts to StreetSport Mounts to Lower NVH Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Versions Virtually Indestructible Lifetime Warranty Updates One Set of Engine/Transmission HARDWARE REQUIREMENTS: This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts. 034-509-5028 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V/8V.5 A3/S3, 8S TT/TTS, and VW MkVII Golf/GTI/R 034-509-5030 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V.5 RS3 and 8S TTRS EVO DAZA NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/RS3 (8V)/Engine Mounts Shop By Car/Audi/TT RS (8S)/Engine Mounts Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts

Read more less

034Motorsport's Motorsport TrackSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport TrackSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Racing and Extreme Performance Applications Great Solution for Highly-Tuned Stock Turbo and Big Turbo Power Levels Replaceable 65 Durometer Density Line Rubber Bushings with Void-Free Construction Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure. FITS: Shop By Car/Audi/S3 (8V)/Engine Mounts Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Engine Mounts Shop By Car/Audi/RS3 (8V)/Engine Mounts Shop By Car/Audi/TT RS (8S)/Engine Mounts Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Engine Mounts Shop By Car/Audi/TT Mk3 (8S)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Engine Mounts Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4

Read more less