Performance - Toyota Yaris GR (2020-Present)

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium under tray for the Yaris GR Gen 1 and Gen 2 models including automatics. The IssueThe original under tray on Gen 1 cars features no venting at all and is made from a weak fibre material construction which will be prone to failure over time. Gen 2 cars feature a plastic under tray but with a small single vent for the transfer case alone.  ConstructionOur solution to creating a direct replacement under tray began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment that reuses all original mounting points and fixings. Made in 2mm aluminium and finished in a high-quality black powder coat, our under tray offers an enhanced level of protection to the underside of the car but more importantly, the design has also been carefully considered to ensure improved cooling and air flow to the vital transmission components.  CoolingWhilst the Gen 1 under trays feature no cooling at all, the Gen 2 under trays feature a basic duct for the transfer case at the rear, as clearly Toyota see this as an area that requires cooling. The AIRTEC Motorsport under tray therefore utilises a much larger scoop for the rear to force more air flow and offer better cooling. It also features a built in gearbox cooling duct, together with a venting section behind it to create air flow to and from the transmission and reduce temperatures. The comprehensive design also features rear ventilation to allow heat to exit the undertray together with side vents to further improve air flow. ConclusionA simple yet effective upgrade that offers improved strength, durability and cooling effectiveness.   Please note: The under tray uses existing mounting points – but it is essential the fixings you use to secure it are of good quality. The original Toyota fittings should only be reused if they’re in good condition. Worn, corroded or broken fixings should be replaced with new items from Toyota, as failure to do so may cause the under tray to work loose. Features: Direct replacement under tray for Yaris GR Gen 1 and Gen 2 (incl. Automatic) Improved cooling to vital transmission components Uses all original mounting points – no cutting or drilling required Created from 3D scan and CAD software for perfect fitment Made from 2mm aluminium for increased strength Comes in a durable black powder coat finish Uses existing fixtures and fittings   Registered Design Right number: Application Pending AIRTEC part no: ATMSYGR32

Read more less

  As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our inlet manifold upgrade aimed at modified Yaris GR owners who want to further improve the performance of their cars for track or fast road use. The DesignWe wanted to develop a manifold with an improved design to allow more flow, whilst introducing longer inlet runners to help produce more power at lower engine speed. We also wanted to incorporate a design that increased air flow balance across the three cylinders. Crucially, we were also determined to create a true direct replacement manifold that required no further modifications, such as custom fabrication or a costly aftermarket ECU. After a thorough development process that saw us simulate and test several different designs, the result is a manifold unlike any other on the market. Tested – Increased and Balanced FlowOur freer-flowing design measured an improvement in flow of 36% in comparison to the original. Furthermore, by flow testing the original manifold and using runner number two as the benchmark, our test data revealed runner number one flowed a 13% difference on average whilst runner number three flowed an 11% difference on average.In direct comparison, the same test conducted on our AIRTEC Motorsport manifold revealed a difference of just 2% on runner number one and only 4% on runner number three, therefore providing much more equal balance across the cylinders, which is crucial for safe and efficient fuelling as well as consistent power and torque. Direct Replacement Fit We also completed our secondary goal of ensuring the manifold was a true direct replacement by utilising the original throttle body and pipework. The manifold also includes moulded fixing tabs to secure the coolant lines and wiring loom, which secure in place as per the original. Lastly, the manifold allows the original rubber gaskets to transfer over for a simple and easy installation process. If you have an AIRTEC Motorsport catch can fitted, please choose from the drop down menu, as the breather fittings require different take offs.Please note: the manifold has been designed to also allow a larger 54mm throttle body to fit if preferred, but this will require additional works to the boost pipework and ECU. Construction Made from high-quality cast aluminium for increased strength over the original plastic assembly, the manifold is finished in high-quality powder-coated black for a neat OEM+ look to improve the appearance of the engine bay. The comprehensive fitting kit includes two replacement Pro Hoses silicone, all fixtures and fittings as well as detailed installation instructions.Please note: the original engine cover will need trimming to fit or you can fit the AIRTEC Motorsport replacement engine cover.  In summary, our manifold is unique, offering unparalleled benefits, proven gains and easy installation, and all at a great value cost.   Dyno TestedThe manifold was tested on our own demonstration Yaris GR fitted with a big turbo conversion, Syvecs ECU and all associated modifications. With no changes (no mapping or increased boost) a back-to-back test revealed the fitment of the manifold alone saw power increase from 405.2bhp to 415.0bhp – an increase of nearly 10bhp with no other modifications. Response also appeared to increase lower in the rev range and with mapping to suit, further increases would likely to be seen.   Features:  36% increase in internal flow compared to original manifold Improved engine performance and throttle response Dyno testing showed increases to both power and torque Proven to distribute flow more evenly across all three cylinders True direct replacement fit that requires no additional parts No ECU/throttle body upgrade or pipework required Will also work with larger 54mm throttle body, if preferred Provisions to secure original coolant lines and wiring loom Cast aluminium construction for improved strength Finished in a high-quality black powder coat Includes all fixtures and fittings required to fit Detailed installation instructions included Registered Design Right number: 6410582 AIRTEC part no: ATMSYGR23

Read more less

As part of our expanding Toyota Yaris GR product range, we’ve developed an aluminium engine cover. This direct replacement part is easy to fit and smartens the appearance of the engine bay, whilst still allowing access to the oil filler cap and dipstick. Raised from the engine to help dissipate heat, the design also features additional venting at the rear, which is closest to the turbo.  Finished in a high-quality black powder coat for durability, the cover comes with all fixtures and fittings, as well as detailed installation instructions.  A simple and effective modification that can be fitted in minutes.  Registered Design Right: Application Pending  AIRTEC part no: ATMSYGR24

Read more less

We’re proud to launch our oil catch can kit for the Toyota Yaris GR for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. TECHNICAL DATA AIRTEC Motorsport Oil Catch Can Kit for Toyota Yaris GR   We’re proud to launch our oil catch can kit for the Toyota Yaris GR for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Yaris model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated matt black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. An catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the Yaris GR Easy, direct fit Billet machined bracket Comprehensive fitting guide AIRTEC part no: ATMSYGR02

Read more less