Performance - VW Golf MK7 (2012-2020)

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

The Racingline Performance High-Flow Turbo Inlet Pipe for MQB Golf 7 GTI/R plus Audi S3 has been engineered to increase air flow through to the turbocharger as the perfect compliment our Racingline Performance R600 Cold Air Intake or even the standard airbox. A simple fitment, it replaces the entire restrictive rear factory plastic bellows pipe between the airbox and the turbocharger inlet pipe. This Turbo Inlet Pipe is a large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. There are solid turbo inlet pipes on the market, but without this compliance as the engine rocks under power, then something has to give – with a solid pipe it will either be your intake, or the pipe itself. Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes a great compliment to the R600 intake. Confirmed Fitment 2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

With the success of FMINDK30 we took the opportunity to revisit the UP GTI and looked to see if we could improve on the 1.0 TSI air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was very restrictive and was an area in need for improvement. Therefore, our highly skilled development team got to work designing a solution to maximize the capacity by using our CAD system and physical prototypes. The OEM plastic turbo inlet includes a restrictive ribbed and hollow noise chamber that is designed to disturb the air flow and reduce induction noise, this OEM part has a detrimental effect to the engines performance especially when tuned. For the best possible gains, we removed the chamber allowing us to increase the volume and air flow significantly. Our hose design also has an internal stepped area where it is positioned and joined to the turbo housing, this is to ensure the transition is as smooth as possible from the inlet tract to the turbo. Several different designs and material choices were tested until we arrived with the product you see here. The construction of FMTIA3 is manufactured from reinforced multi ply silicone which is more durable than the OEM plastic pipe and it will also not suffer from heat soak like other similar products available. With its enlarged capacity and less restrictive surface area it routes air directly into your turbo charger and allows a greater volume of air to be compressed, this can have a positive effect on accelerating your vehicle after long deceleration or in between gear changes due to more air being kept within the inlet tract to the turbo charger. One significant feature of FMTIA3 is its compatibility with vehicles equipped with and without the PCV system integrated into the existing turbo intake, the early engines do not have the breather system in place from the fuel tank to the elbow. We supply the necessary hardware to blank of the elbow spouts if its required to fit the turbo inlet adaptor to the earlier engine revision The one way valve and coupler adaptor are also supplied so the elbow can be installed to the newer revised engine. The FMTIA3 is also compatible with the factory air box, however for the best performance results we recommend using our intake systems for your particular chassis application.   This is a product which is essential when tuning the 1.0 TSI engine, if its either stage one or stage two tuning we have seen consistent gains from 3-5 bhp depending on the vehicles state of tune. This is a straightforward yet very effective power increasing modification that can be fitted with basic tools and has a typical installation time of around 60 minutes. As with all Forge products it includes a full set of comprehensive installation instructions to make fitting as straightforward as possible. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically Increased capacity  No engine check lights (EML) Increased air flow Lifetime warranty* FITS: >> AudiA1A1 (8X) 2010-20181.0 TSI 2015-2021 A1 (GB) 2018-1.0 TSIA31.0TSI>> SeatArona1.0 TSIIbizaMk5 (KJ) 2017 - late 20211.0 TSILeonMk3 2012-20201.0 TSI 2015-2020Toledo1.0 TSI >> SkodaFabiaNJ 2014-20211.0 TSI Octavia1.0 TSI (2018-2021)Rapid1.0 TSI>> VolkswagenGolfMK71.0 TSIMK7.51.0 TSIPolo1.0 TSI T-Roc1.0 116PSUp1.0 GTI/TSI

Read more less

This is a performance enhancing air scoop for the MK8 Golf GTI EA888 EVO 4 engine. Features Can be be fitted in conjunction with the factory air intake system Perfect when installed alongside with our MST Performance Intake System More pronounced intake sound Features twin air tunnels instead of just one on the factory system What Does It Do? This performance air intake scoop delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated intake scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2020-2025 VW Golf R (MK8) 2.0 TSI 2022-2025 Skoda Superb (MK3) 2.0 TSI 2020-2025 VW Tiguan R (AD/BW) 2.0 TSI

Read more less

  The APR Open PEX intake system is the best price/performance intake system on the market and has already been installed thousands of times in vehicles.The sound and performance of the engine were significantly increased and the restrictive area in the intake tract was eliminated. This made it possible to reduce the pressure loss and increase the efficiency of the turbocharger while doing the same work. This results in more power and torque while reducing load. The system uses a washable 7-inch and very high quality conical cotton filter that has a 4-inch connection.This was also necessary to reduce the standard pressure drop and maximize the airflow while also significantly increasing the sound aspect. The PEX material conducts heat very poorly, which also benefits the system and therefore ideally contributes to increasing performance.The PEX material still gives the engine compartment a touch of stock component, as far as you can say for an open air filter. The material also offers the advantage that almost any design can be realized. This made it possible to create an extremely complex and organic shape of the heat shield, which can effectively shield the hot air from below. Features: Improved intake noise Reduction of pressure loss Increases the efficiency of the turbocharger ore power and torque High quality cotton filter Airflow is maximized Made from PEX material FITS: Shop By Car/Volkswagen/Passat B8 Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Skoda/Superb (3V 2015-) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F) Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4  

Read more less

VAAGSport Turbo Muffler Delete for 1.8T/2.0T MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Arteon 4Drive, Audi S3 8V, TTS 8J, SQ2, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI), Cupra Ateca 4Drive Removes the turbulent OEM muffler on the turbocharger. The original muffler essentially acts as a suppressor reducing the turbo sound that tuners and drivers love. The VAAGsport kit has duel seals set into machined grooves so they not only ensure a perfect seal and no boost loss but makes the kit super easy to install. What’s Included Turbo Muffler Delete Comparing stock to VAAGSport

Read more less

VAAGSport High Flow Turbo Elbow for MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Audi S3 8V, TTS 8J, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI) Elegant design and practical gains. Removing the restriction to the stock IS38/IS20 turbo air flow is paramount, an increased dose of cold air to the turbo gives a extremely worthwhile power gains. Compatible with all 1.8T & 2.0T EA888.3 vehicles, the VAAGSport Turbo Elbow should be one of your first considerations for improving the vehicles air intake system. A great idea on a stock engine, essential on a tuned vehicle. Works even better when combined with the VAAGSport 3” high capacity intake hose and high flow air filter. Suitable for up to Stage 3 tuning (with supporting mods) What’s Included High Flow Turbo Elbow Inlet Note If you are planning to use this item on an Ibiza 1.8TFSI, Polo 1.8TFSI or Audi S1 2.0TFSI – You will need to purchase an additional PCV Breather Pipe.The part number for this is 06K 103 213A and it can be ordered from here. Comparing stock to VAAGSport

Read more less

The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, They've created their own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, they've manufactured what we believe to be one of their best and most important performance products, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. They’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle. Leyo Motorsport turbo inlet pipe can have on your pride and joy. Be sure you’re quick to order as demand is currently through the wastegate. Designed by Leyo and tested by the Leyo Motorsport team HQ. Full aluminium tubing. CNC Aluminum Shark Fin flange for secure fitment. CNC Aluminum OEM neck for secure fitment Fits all Air Intake system on the market. Smooth, more linear power gains. Larger than the OEM unit for increased air flow. Simple installation Powder coated & laser etched logo. Race Track Proven

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

A must have for R600 intakes, Racingline Underhose Our new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. Includes a factory one-way valve incorporated, just like the original; don’t run your car without this valve! CONFIRMED APPLICATIONS VWR17 G7R600 FOR CARS WITH R600 FITTED > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

034Motorsport's Carbon Fiber Fresh Air Duct is now available for the 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R! Designed to better route cool, dense air from the front of the car to the airbox. This high-quality carbon fiber piece offers OEM+ fit and finish, and is the perfect match for your X34 MQB Air Intake. Unlike the factory plastic air duct, the 034Motorsport Carbon Fiber Fresh Air Duct provides a smooth, direct path for air to enter the airbox from behind the factory grille. In addition to allowing for more airflow to the factory airbox, the Carbon Fiber MQB Fresh Air Duct also yields a noticeable improvement in induction and turbocharger sounds. Features: High Quality Carbon Fiber Construction OEM+ Fit & Finish Improves Airflow from Front of Vehicle to Airbox Eliminates Factory Plastic Blockoff at Core Support Increases Induction & Turbocharger Sounds Offers Simple, Bolt-In Installation What's Included: 034Motorsport Carbon Fiber Fresh Air Duct Self-Adhesive Coolant Hose Clamps (Set of 2) Installation Instructions: Click Here!

Read more less

APR Carbon Open Intake System - MQB - 1.8T and 2.0T EA888 Gen 3The APR Open Carbon Fiber Intake System is the ultimate intake system for the 1.8T/2.0T Engine! We've maximized performance and sound dramatically by reducing pressure drop and increasing airflow. This translates to more horsepower and torque, and less physical strain on the turbocharger. The system looks great, sounds amazing, and produces more horsepower and torque you can feel.Our beautiful carbon fiber intake system does away with the closed airbox design and uses a massive 7" washable and reusable cotton filter with a frontal inlet and 4" rear outlet. This was necessary to limit pressure drop across the factory system and maximize airflow, while allowing you to fully hear the engine breathe! The massive filter provides excellent filtration. By oversizing the filter, we're able to limit pressure drop without sacrificing filtration. This is made possible through the use of greatly increased filter surface area. Carbon fiber not only looks great, but it allows us to make a complex and organic heat shield shape that keeps hot air pushed through the frontal radiator away from the intake tract. Furthermore carbon fiber allows us to limit wall thickness on the intake pipe, maximizing the pipe's internal diameter and thus airflow. Lastly, carbon fiber retains heat less than other materials, such as metal, making it ideal for performance.The factory intake system simply can’t match the performance of our intake system. The full factory frontal airbox only flows 521 CFM at 28” of H2O. We improved this by 60% with our open airbox, which flows 833 CFM by comparison! However, it’s important to always look at the intake system as a whole as flow numbers alone don’t always speak to the broader picture. The factory turbocharger can only flow just under 400 CFM through the factory opening, and any intake system will lessen maximum flow. The goal is to minimize all restrictions before the turbocharger as much as possible to maximize performance. The full factory system brings this down to 275 CFM, or 31% less. The full APR System (Open airbox, rear pipe, and turbo inlet pipe), bring this down to 345 CFM, which is only 13% less, or a 25% improvement over stock! This directly translates to more power you can feel. Our full bolt on APR Tuned S3 saw max gains of 12 AWHP and 13 AWFT-LBS of torque using the full intake system compared to stock! These are solid gains that make a noticeable difference in performance! FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

Looking for a replacement filter for your APR / APR Carbon Air Intake? Look no further. Fits The following engines with APR or APR Carbon intakes:* 2.0TSI Transverse* 1.8T 20v  Note: Hose clip not included

Read more less

APR Carbon Intake System - MQB 1.8T / 2.0T EA888 Gen 3 The APR Carbon fibre Intake System is an attractive high performance upgrade for the latest 1.8T and 2.0T engines as found in various MQB platform vehicles. The factory intake design has the foundation for excellent performance, but much of this is sacrificed in an effort to meet other design requirements. With requirements set forth for only supporting factory power output levels, low engine sound levels and long service intervals, there is plenty of room for improvement. The APR Carbon fibre Intake System increases performance primarily by improving mass airflow through the system while still proving adequate filtration. Expect greater horsepower and torque through the power band with a more direct and responsive feel upon pressing the throttle. Sounds from the engine and turbocharger are enhanced and some may even experience better fuel economy depending on driving style.Research and Development: Uncommon to most in the market today, APR spared no expenses during the research and development period. For the better part of a year, APR’s Mechanical Engineers created several prototype intake designs utilizing our in house Sterolithography 3D printer and other rapid prototyping techniques. Various filter mediums were tested in conjunction with the new intake designs through simulated models, flow bench analysis, dyno data collection and in real world applications all in an effort to derive the best possible solution.Intake Air Temperature Management: Intake air temperature (IAT) plays a critical role in engine performance, especially on turbocharged engines where the ambient air temperature is raised twice through both compression via the turbocharger, and then again during the engine’s compression stroke. In an effort to maintain the lowest possible starting IAT, the APR Intake system begins by drawing air from the coldest possible location, which is the front end of the vehicle before the radiator. Air travels a short path through the intake system, past the filter and on its way to the turbocharger through a sealed intake design that prevents ingestion of hot, under-hood air. Finally, the intake’s carbon composite design features a thin fibreglass backing, which improves thermal insulative properties. Filtration: APR’s design requirements called for an intake filter medium that exhibited high flow capabilities, long service life and adequate filtration properties. While traditional paper filters and even some foam filters can achieve one or more of these requirements, only a pleated cotton filter was able to achieve all three. This is due in part to the intake housing’s volute design and turning vanes. With even pressure flow distribution across the entire filter element, the filter is loaded more evenly, retaining performance over time, increasing the length of the maintenance intervals, and increasing the filter's effectiveness.Sound: In an effort to please customers unaware of the sounds caused by turbocharging an engine, as well as cross platform use on both economy and performance oriented vehicles, the OEM was tasked with creating an intake that many would consider to be too quiet for a performance vehicle. APR’s design requirements called for an intake system that only delivered the engine’s true turbocharged sound as air is sucked through the turbocharger or exhausted from the diverter valve upon lifting off the throttle. The inherent stiffness of carbon fiber composite material results in an induction resonance from the engine allowing the occupants to hear a clean and crisp intake note without being overbearing or cheap sounding in nature.Installation: The intake system comes pre-assembled from APR ready to be installed in minutes with minimal tools. With the factory unit removed, the intake slips into place and connects to the factory turbo inlet pipe using the OEM hardware without filling the engine bay with additional couplers and hose clamps. Because the system fits in the OEM location, it’s fully compatible with future upgrades from APR, including our larger Stage III Turbocharger Systems.Optional APR Silicone Coolant Hose:The factory coolant hose is designed to be routed over the top of the intake system. However, when routed underneath the intake, it’s far more aesthetically appealing. The APR coolant hose replaces the factory unit and routes cleanly under the intake and around the APR catch can without kinking or adding extra stress to the mounting points. FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

APR Carbon Intake Pipe - EA888 Gen 3 1.8TFSI / 2.0TFSI The APR Carbon fibre Turbo Inlet Pipe replaces the rear factory plastic accordion tube with an attractive carbon fibre inlet, complementing the APR Intake System’s aesthetically pleasing design. The intake and inlet hose are joined via a necessary flex coupler to allow for adequate engine movement under use without damaging the intake. The turbo inlet pipe is completely compatible with all factory turbochargers and APR’s Stage III Turbocharger System. FITS: Shop By Car/Audi/S3 (8V) Shop By Car/Volkswagen/Golf Mk7 Shop By Car/Skoda/Octavia Mk3 (5E) Shop By Car/Audi/A3 (8V 12-20) Shop By Car/Audi/TT Mk3 (8S) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)

Read more less

​​​​​​Fitting this part increases the airflow into the turbo by replacing the restrictive plastic OEM turbo inlet pipe. This innovative product fits all MQB platforms as well as both left and right hand drive vehicles and is a direct replacement for OEM part code 5Q0129635L. When fitting this part, you will increase the available airflow and create an impressive sound by creating a larger, smoother transition between the turbo inlet hose and compressor housing inlet. An all-aluminium construction that fits with standard inlet hose or aftermarket systems, featuring a precision mandrel bent CNC formed pipe along with a precision CNC high flow machined flange. Twin o-ring seal design between the turbo coupler and inner surface of the turbo inlet ensures no leaks and no debris can be drawn into the turbo internals. This part also fits with our induction hose, FMMK7INDH Increased airflow. All aluminium construction. CNC machined couplers for a precision fit. No check engine lights Black hardwearing powdercoated finish. Compatible with LHD and RHD Up to 8 BHP and 16 ft/lbs or torque improvement Made in Great Britain. FITS: AudiA31.8/2.0 TSI 2015 OnwardsQ32.0 TSI (2015-2018)S1S32.0 TSI (8V Chassis)SQ22.0TSI (2018-2021)TTMk32.0 TSI 2015 OnwardsTTSMk3 8S (2014-2021)CupraAteca(up to 2020)SeatLeonMk3 2012-2020Cupra 280/290/300RSkodaOctaviaVRS 2.0 TSI 2013 OnwardsSuperb1.8 TFSI 2015 onwards280 4x4 DSGVolkswagenArteon(2017-2020)2.0 TSIGolfMK71.8 TFSIGTIRMK7.5GTI RJettaMK7 (2018-2021)2.0 GLIMK7.5 (2021-)2.0 GLIPassat2.0 TSI (2015-2021)PoloGTI 2.0 2018-2020 AW ChassisT-Roc2.0 2018-2021Tiguan2.0 TSI 2017 Onwards   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

TECHNICAL DATA AIRTEC Motorsport EA888 turbo induction elbow – A simple modification designed to direct and increase air flow into the turbo. The EA888 turbo induction elbow is a much larger diameter, free flowing pipe, designed to replace the small restrictive standard pipe. Works perfectly with our AIRTEC Motorsport induction kit. Features: Larger internal diameterDirect replacement of standard pipeEasy installEnhanced induction noiseIncreased flow for more powerSupplied with new O ringOnly available in pro-series black. AIRTEC Part No: ATMSVAG3

Read more less

2.0 TSI EA888.3 & 3BTurbo Muffler DeleteFor all VW, Audi, Cupra, Skoda 2.0 TSI A smooth, turbulence-free air path exiting your turbo with the RacingLine 2.0 TSI Turbo Muffler Delete. What theTurbo Muffler Deletedoes. Our Turbo Muffler Delete is a sleek single billet design which replaces the restrictive, power-robbing compressor outlet with a smooth, turbulence free air path exiting the turbo. The standard part is located on the outlet of the turbo compressor and is simply designed to reduce engine bay acoustics. Whilst it subdues the harmonic noises generated by the turbo, it also adds in disruptive turbulence to the airflow right where you don't want it.   By replacing the standard part with our maximum diameter Turbo Muffler Delete, you’ll replace this unwanted restriction with a smooth CFD-developed uninterrupted air path.  The result: noticeably better boost response giving a little more power and throttle reaction, all the while being able to actually hear your turbo working. COMPATIBILITY The Turbo Muffler Delete is compatible with all MQB EA888.3 1.8T and 2.0T cars. An essential fit with any upgraded intake system. TURBO SOUNDS By smoothing the airflow path out of the turbocharger, eliminating the restriction and turbulence caused by the OEM part, you'll at last be able to hear your turbo working! EASY FIT Fitting is straightforward. The kit is installed in around 30minutes using just hand tools.   And easily returned to standard, should you ever wish. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. CNC constructed from single-piece billet T6-6061 aircraft grade aluminium. Hand polished then anodised in gloss midnight black to look good, and stay looking good. Maximum diameter smoothed internal bore for max airflow. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS 2.0 TSI & 1.8 TSI EA888 gen.3 & gen.3B engines VWR160001  > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

The Ramair Silicone Intake Pipe (part no. RIP-007-BK) has been designed to replace the standard OEM plastic induction hose on the 1.8 & 2.0 TSI EA888 engine in the VW Golf MK7 GTI, VW Golf MK7 R, Audi S3, SEAT Leon Cupra and other MQB platform vehicles. The hose is constructed to provide a constant radius reducing restriction in the initial stage of the intake tract and is a direct replacement for the factory pipework. The hose is supplied with a pair of high quality Stainless Steel W2 hose clamps replacing the difficult to use OEM spring clamps. The hose is made from high-quality multi-ply silicone with fabric mesh reinforcement. It can be used in conjunction with the standard factory air box or any aftermarket induction kit that mounts to the standard air box position. Silicone Internal Diameter Turbo: 70mm Silicone Internal Diameter Inlet: 80mm Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2012-2021 Audi A3 (8V) 1.8 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI

Read more less

2.0 TSI Turbo 90 Inlet.For all VW, Audi, Cupra, Skoda 2.0 TSI EA888.3VWR12G7R600ITINLET  The RacingLine 2.0 TSI Turbo Inlet is an essential addition to your airflow package - ultra-thin-wall, double O-ring flow from intake straight into turbo What the 2.0 TSI Turbo Inlet does. A simple fitment, the ultra-thin-wall VWR High-Flow Turbo 90 Inlet is a large diameter, free flowing intake elbow, delicately CNC machined from aluminium billet to replace the small and restrictive plastic factory inlet.  The factory inlet forces the airflow to taper right down to pass through a tight and restrictive bend - in other words, terrible for flow.  The RacingLine Turbo 90 is the thinnest-wall construction on the market for highest flow. Twin O-rings ensure the perfect seal. Some of our rivals' less carefully-machined, or even thick cast versions rob valuable airflow. Put simply, without it, you’re wasting much of the potential of your high-flow intake system without fitting the Turbo 90. An essential upgrade! COMPATIBILITY The Turbo 90 Inlet is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake. POWER GAINS Take away the standard plastic elbow's highly restrictive airflow path through to the turbo. The ultra-thin wall VWR High-Flow Turbo 90 gives a worthwhile power gain through smoothing and opening up that turn into the turbo. EASY FIT Fitting is very straightforward. Twin O-rings ensure perfect seal. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish. Precision engineered forperfect performance. The white laser-etched RacingLine logo is all part of the detail. Twin nitrile O-rings for the perfect seal. CNC constructed from T6-6061 aircraft grade aluminium. Hard anodised in gloss black to look good, and stay looking good. Maximum diameter ultra-thin wall smoothed internal bore for max airflow. SPOT THE DIFFERENCE CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less