Airtec Shop

AIRTEC Motorsport Enlarged Cast High Flow Throttle Body Elbow for MK8 Fiesta ST (Also fits Focus MK4 1.5 ST-Line). Designed to replace the restrictive OEM pipe, to improve air flow. TECHNICAL DATA   AIRTEC Motorsport Enlarged Cast High Flow Throttle Body Elbow for MK8 Fiesta ST (Also fits Focus MK4 1.5 ST-Line). Designed to replace the restrictive OEM pipe, to improve air flow. Straight forward simple install. Features: Improved air flow Cast CNC machined Simple DIY install All relevant take-offs  

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Focus Mk3 EcoBoost Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque  More responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') Free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install Optional Pro Hoses induction hose - Recommended for durability and strength compared to standard hose. Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modification that transforms the look of your engine bay. AS good AS it gets. Comes with 24 month warranty 'conditions apply' PLEASE NOTE: Currently does not fit the PRE-FACELIFT screw type MAF sensor. Only fits FACELIFT push and twist sensor.

Read more less

Our AIRTEC Motorsport torque mount delivers on every level, from quality, price and usability. The Yellow bush insert is perfect for everyday use and the odd track day, close to standard driving experience without the excessive engine movement.The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massively reduces engine movement for faster gear changes. New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use. Features: 2 x Polyurethane bush inserts – Yellow Fast Road & Purple Track/Race CNC from solid billet alloy, bead blasted and anodised in satin Black Reduces engine movement and wheel hop on hard acceleration A must for modified cars Replaces original ford cast alloy and rubber torque mount Faster gear changes due to less engine movement Can be fitted in under 30 minutes with no special tools required This is why we choose Power Flex:The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs. Fits:Focus MK2 ST & RSFocus MK3 ST 250Focus MK3 RS  

Read more less

The 2.5" big boost pipe kit is a must for all remapped STs, Everything you need is included in the kit. Features: Hot side (turbo to intercooler) is made from 2.5" light-weight alloy and connected with Pro Hoses 5 ply silicone hose joiners. NEW! Now comes with 3 pce cold side Please Note: This is a Symposer Delete Item Will fit With the following intercoolers: AIRTEC Pace Pro-Alloy Forge Ford OEM Direct replacement! No modding required. Our 2.5" hard pipe upgrade removes Ford's 2.0" restrictive boost pipes and can see 'bolt on power'.   This kit is designed for BIG BHP / Remapped Focus ST's. All pipes have swaged ends to stop the pipes blowing off on higher power cars. Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Fitting takes 1 - 2 hours. Due to high demand please allow 7-10 day delay before delivery. Pipework only available in pro-series black (silver for picture purpose only) - Hoses now in black only!

Read more less

The Ultimate alloy Turbo top induction pipe Mirror finish , the ultimate finishing touch to any engine bay! Now available in 3 different finishes, Pro-Series Satin Black, Polished Silver and the new Satin Silver (Motorsport Style Finish) Fitting takes about 20-30 minutes Registered Design Right number: 6033438

Read more less

AIRTEC Front Mount Intercooler Features  1 x twin pass huge 60mm core intercooler with flowed cast end tanks, this means less welding and a stronger intercooler Comes with full fitting guide & pipe work  No cutting bumper with our intercooler kit  Unbeatable value for money Available in Satin Black or Natural Silver AIRTEC 3 year unlimited mileage warranty Fitting will take 1-2 hours depending on mechanical skill   Finished In Pro-Series Satin Black or Natural Silver Proven horizontal 60mm core, runs left to right of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better. Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum air flow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more air flow to the intercooler, we suggest to do this whilst fitting. Uses original crash bar holes, no drilling or modification required! Please note: Pipework only available in silver Approximate Dimensions: Thickness – 60mm Width – 525mm Height – 378mm Currently sent with Mk7 1.0 Fitting instructions as a fitting guide. Currently does not fit cars with adaptive cruise control.  

Read more less

The Stage1 ST180 Eco Boost intercooler features our proven race quality Bar 'n' Plate core, this core has always proved to out perform it's lighter weight Tube and Fin competitor. The new ST Fiesta is a great car and why not make it even better and fit the best, fit AIRTEC.  Fast Ford magazine intercooler test - measured in degree's C Standard Run 1 Intake temp turbo into intercooler 140 out of intercooler into engine 85 Run 2 Intake temp turbo into intercooler 131 out of intercooler into engine 92 Run 3 Intake temp turbo into intercooler 140 out of intercooler into engine 97   Airtec Run 1 Intake temp turbo into intercooler 140 out of intercooler into engine 31 Run 2 Intake temp turbo into intercooler 150 out of intercooler into engine 38 Run 3 Intake temp turbo into intercooler 152 out of intercooler into engine 39 AIRTEC Front mount Intercooler Features  1 x Huge 70mm core Intercooler with flowed cast end tanks, this means less welding and a stronger Intercooler (Ford Intercooler 50mm core) Come with full fitting instructions No cutting or drilling with this kit Logo's have been put onto flowed cast end tanks Un-Beatable value for money Proven Power Increase's for Fast Road & Track Available in Satin Black or Natural Silver Airtec 3 year unlimited mileage warranty Fitting will take 1-2 hours depending on mechanical skill Proven to handle 250bhp Finished In Pro-Series Satin Black or Natural Silver. Will fit Fiesta ST 200

Read more less

Is your intercooler looking a bit run down? AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler. Stencils available for all AIRTEC intercoolers.     Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1) Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane. Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3) Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.

Read more less

The Original German quick shift 'Progress through technology' Reduce gear changes by up to 30%, faster gear changes = faster cars Features Billet Alloy construction with stainless steel ball end Reduce gear changes by upto 30% Easy DIY job, takes approximately 10-15 minutes to install Fits both ST & RS Models Comes with full fitting instructions

Read more less

Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO7

Read more less

AIRTEC Motorsport boost gauge kit for Fiesta 1.0 Ecoboost. The AIRTEC Motorsport Fiesta MK7 boost gauge kit, supplied with Turbosmart Boost Gauge in PSI or BAR. A simple modification with an OEM look. Comes complete with fitting guide for a quick & simple DIY install. Kit includes: Turbosmart backlit boost gauge (Bar or PSI) Gauge securing ring Vacuum hose Bracket and bolts CNC vacuum take off (Fits onto inlet manifold)

Read more less

Reduce your stock throws with two different positions ranging from 15% and 25%. Offering 2 positions truly allows the user more options to fine tune their shift throws. Fiesta MK8 ST-200. AIRTEC part no: ATMSFO104

Read more less